Axia Discussion Board

Clark, that's no problem. But I think it is good to know about that little issue before... Just to know that such things could happen and not to get nervous thinking that you are doing something in a wrong way. Everything went fine in the end and everybody is happy!

I have just updated 7 MixEngines (night work). The only problem with the procedure is that four of the seven Engines failed to load converted configurations at once. Sometimes you need to do it twice, at one of the Engines I have repeated restore procedure 5 times until it was successful. I used Moz...

Yesterday I have performed the procedures according to the first post here. All worked out fine, both the conversion utility and awrite program. Just want to add here 2 notes. 1. My demo Engine, purchased in the fall 2008, is running on ASUS N4 motherboard but on the System web page of Engine it sho...

Hi Fred, just tried to download description how to set up the driver on Linux, but got this reply (subj).

How can I get it? Thank you.

Nick

Milos, thanks for answering.

The reason for my question was not in an issue that we have encountered in this beta version (we never did). We will have a big installation soon involving LW and our radio automation system, and we just wanted to check if anything new is coming.
Thank you again.
Nick

When do you plan to publish a release version with ASIO support?
Thanks
Nick

OK, thank you. Will be waiting...

Milos, thank you for answering. Although, it would be of interest to have this feature. Faders of 2001-10221 monitor+2-fader module have 2 buttons: Set and Hold, which make life easier when working with hybrids. 2x12 system has 2 audio ports, so it seems to be reasonable using it particular with tha...

Hello, Is it possible to configure remote control of TWOx12 via Ethernet from Element's Monitor+2-fader module? I mean, I want to answer to incoming call by opening the corresponding fader channel (or by hitting preview button). This is working with Telos TWO ISDN, but is it possible with TWOx12? Th...

Hello Axians,

I just tried to find how to set password for MixEngine's WEB access but I can't. Maybe I am overlooking something evident?
I found only how to set front panel's passcode.... ((

With Element and nodes I have no problem with passcode.

Nick

Hello Mike,

thanks for comments.

Nick

Hello Clark, could you please give more tech details about that? I did not find anything in that regard in release notes to the new software. I remember we had a problem with Microphone node (audio dropouts which happened very-very seldom, maybe once or twice per day - audio from mike was lost for a...

Michael, just one remark to your words: You will want to switch pin 13 low to turn on the audio (Enable EXT PREVIEW Command). If you want the audio on all the time, you can jumper this pin to ground. Yes, I want the audio on all the time. When I jumpered this pin to ground, it worked. But when I rel...

Hello Michael.

Thanks a lot for explanations. It works! And a smile on customer's face which is most important.

Kind regards,

Nick

Hello! I want to assign external preview source for Element (the source is not assigned to a fader, so I can't use channel preview button). I am going to Element's Web interface - Show Profile - Monitor Section Screen - SOURCE ID FOR EXTERNAL PREVIEW and setting there the source for preview (source ...