Axia Discussion Board

I am looking at adding TB between two iQ's, but one does not have user buttons (I really don't want to build outboard unless I have to!). Is there any way to use the logic within the TALK TO STUDIO button for this function? I see that the GPIO Livewire channel that I am using for CR (tally) actuall...

I just spoke with the support tech on your case and he will work with you on attempting to reduce CPU. Drop in CPU is not a very common practice. A customer in France did this and I'm not sure how successful that was as they later upgraded to the Fanless Engines. We later saw their original units an...

In KFMK's case, the engine utilization is rather high. Which hardware version of Engine and which software. It is possible the engine isn't able to keep up to the load. In older software versions, the CPU utilization reporting was not able to show peak utilization. At 80%, it is likely the CPU is pe...

In Fabien's case, the drop outs may be in the input to the PC. The evidence of this is in the RxUr and RxSeqErr. RxUr is an under run counter, which is a situation where the receiver buffer went empty before another packet was received. This can cause audio break RxSeqErr is sequence error counter, ...

Try to restart the Advertisement service. The advertisement function allows the consoles to know of the source. If the console doesn't believe the source is available, it will not show the source profile for selection.

Download version 5.20 from pathfinderpc.com.

Your qualifier will be to "Axia Console Change". When editing the qualifier, select the console, followed by selecting the Monitor option. At the bottom of the view will be 4 soft buttons.

Matt: You had received a response to this inquiry through others means at a previous date. For others reading this post, the answer is we will support Windows 10 when we are confident it is more stable. At this time, any work we do may need to be re-done because the OS is still in development. Once ...

If you have Element separates (not a PowerStation), then you should install the following patch into the Element/GPIO-PS.

If you have a PowerStation, you will need to upgrade to the next release. This will be available in late November.

Fanless Engines that have been available since this year. Production will be later this year.

The question is really what will SS32 support. The IP-Driver has built in GPIO, but the SS32 needs to support that. The same would apply to the AudioScience card, how does SS32 support it. If SS32 doesn't support any of these options, than you need to see what SS32 does support. If a rs-232 connecti...

Make sure you have the operator microphone assigned to a channel. If not, you need to assign an alternate source to be the taklback audio in show profile.

Next is to make sure the headphone is monitoring the Talent HP source.

The Fusion is based on the Element, but has new features. So it will appear similar to Element but has some interesting new additions. The obvious is the OLED displays on the overbridge which permits us to provide confidence meters per fader. The surface also connects to the network through ethernet...

Take a look at building stack events that as a qualifier, the VMIX channel is on OR the studio PGM1 is directly routed (an option you can also have). When true, assign the GPIO to the required channel after 5 seconds. Action when not true will be to clear the assignment. Purpose for the delay is to ...

The pop-up window is information stored in the local device (the node) based on advertisement information from all devices and a periodic refresh/purge of said information. This means that if a device stops advertising, the node may purge its "advertisement information" until which time it receives ...

The connection on the SmartSurface is for a direct wire hardware and not an ethernet based connection. The Smart surface manual covers this in Appendix D.