Axia Discussion Board

The call controller I'm referring to is the Axia module that includes two faders. This module does not connect to the Telos boxes, but is part of the CANBUS network of the console. So the software of the console communicates to the Telos boxes (2101, 2x12, Nx12, Nx6, VX, iQ6). The RJ11 connection yo...

The request for the feature is somewhat old and has been available secretly for some time. To those projects, they desire overly complex workflows and try to use products in ways outside of the design specification. The Multicast GPIO function helps to this end. For example, the CR logic function of...

No need to do anything with Pathfinder in this case. When you have a call controller, it acts as a client to the Telos box (the server). So entering the properties in the Element show profile will effectively cause the call controller to log into the Telos unit on the load of the Element profile. Th...

One server for the entire facility is all that you need. There are two versions of Pathfinder, there is the PRO version and PC version. The PC is for budget minded customer, but know that it has a limitation on amount of devices it will connect to. Some customers have found this limitation eventuall...

I suggest updating to version 5.0. This version will be posted soon as a release candidate. Visual defects with the grid view have been resolved.

You can check for updates [here]

Most modern day network interfaces work today. When Livewire was first introduced it was on the "bleeding" edge of what consumer products could do. Our list of interfaces became obsolete as we spent our Engineering resources on product and no longer "proving" AoIP was a reality. Some years ago there...

Please provide versions of software you are using.
Once a backup config is loaded, the QOR requires a reboot for the backup settings to take place. I believe you state you did this, so mystery why you had trouble. If you can share the versions of software, that will help understand the issue.

Great question Warren. One issue with said operating systems is the need to provide the virtual sound card drivers. This has been challenging for various different reasons. Once the sound card issue is resolved, than we can discuss iProfiler being rewritten for the other platforms.

The specification for the XY did not define a feature as you offered. I'm afraid today there wouldn't be a perfect solution. I will post the feature request for it to be considered. Thank you for the great idea Doug.

Sorry about that Doug. That item has been identified and resolved. It will be rolled into the next release package which should be known as version 1.5. If you can't wait for the released package, you can contact support and let them know you want a beta version that has a resolution for ticket RM35...

Couldn't you switch between studios with an ethernet connection to one studio switch and load the profile from one studios console on another? I think the original request was for a Give followed by a Take. Also stated as an Arm followed by Take. The single show profile load provides little protect...

The information is stored in an XML file. I can't think of any available functions that would allow to do what you want. Please share the functionality you are wishing to achieve (a case example is helpful). Maybe it can be added as a feature request.

When a Livewire source is loaded to an iQ console, it would automatically send logic through the network. The logic it sends is based on the profile type you have defined. Chapter 5 of the manual (rev 1.2) will have tables that show that logic. If you had a GPIO xNode on the network, and you assigne...

That is a good question and one I've not come across. At the moment there is no means to change the txt when in GPIO snake mode. I believe that in this mode the displays are hard coded to represent their configuration state which is that they are in snake mode, what channel assignment, and which pin...

VMIX can be controlled through a GPIO port. With Element, this is a legacy method and depreciated. To enable this you would need to configure in the engine for VMIX control by Element. Since it is depreciated, this option is not available in PowerStation, and only in separates. In iQ, there is a vmi...