Axia Discussion Board

I was mistaken, this is currently not an option and for good reason. If doing such, the end user risks having no mute control and no volume control of the External source.

to configure the iQ phone controller to control the 6 possible lines of an iQ6, edit the show profile of interest (or all 4). under the Phone Connection heading, there is a "Phone Server IP" field. Enter in the user:password@IPaddress telos:telos@192.168.2.37 You then need to enter in the "Studio Na...

Two option to do this. ONE) use the VMIX option to sum your preview mix and the single source from the playout. The vmix is what you assign to the analog output that drives your Preview speaker. TWO) use the external Preview option in the show profile. Define the playout source. This will require th...

VMODE provides a single conversion option to generate a mono sum output of one of the PGM mixes or the VMIX.
Telephone feedback is already mono summed.

Telnet to the IP driver, port 93. If using the same PC that ip driver is installed, you can use the loopback address. telnet 127.0.0.1 93 Enter in the command for reporting GPO, all caps. ADD GPO You should get a response of the current GPO states. Press the ON/OFF buttons for the source, this shoul...

If the PC has the multichannel version of IP driver, yes, the GPIO is carried through IP.

NexGen interfaces with the GPIO of the IP driver, not with the GPIO of an ASI card.

I assume you are using an IC.1 in the same space as the iQ console. a) We use an intercom panel mic ... but can the console presenter mic be used via LW as the intercom mic source if needed ? In order to do this, you would dedicate an Analog output of the QOR to be the Microphone # input. You wire t...

Setting up an ON AIR LIGHT. Select the Shows link. Under the "Monitor Section", there is a text field for Logic Port. Find the text field for CR monitor (not Studio Monitor). Enter a unique number in the text field (example, 999). Select the OK button. Select the GPIO link. In the desired port, sele...

Pathfinder should be able to detect a GPO change of state, but officially does not support iQ at this time. Closer to 4th qtr should be more information on Pathfinder support for iQ

Maybe you need to provide more information on how you wish to use the IC.1, but the IC.1 has inputs for audio input and has a speaker for audio out. You connect the IC.1 to the switch so that the IC.1 can communicate with other intercom units in the network.

milos

That was a long time ago, but yes, it was a stack event that was made which allowed for all the control and status feedback.

I imagine that I built the logic of the top button to control a memory value. This memory value than defines the states for the other buttons.

milos

The feature of being able to "listen" to an input was introduced in Windows 7. There is no method that I know of to do this in Win XP.

IP driver today does not include sample rate conversion. ASIO4ALL does the sample rate conversion. So does your SoundForge. So did the Previous versions of Audition. At the moment, the ASIO4ALL is the work around that I know of.

Preview is post gain change. There is not currently a unity level for Preview.

Preview is not designed to be a part of CR monitor within the DSP. To mix the two, it is common practice to use VMIX.