Hi All
Anyone got a how to for setting this up.
I would like to be able to control the automation system from an Element console as well as use events from the automation system to trigger Pathfinder Stacked events.
Any ideas would be appreciated.
Thanx
Warren
RCS Master Control 15.3.3d GPIO config
Moderators: AXIA_milos, Maciej
-
- Posts: 7
- Joined: Wed Oct 17, 2007 8:00 pm
- Location: Port Elizabeth, SA
- Contact:
- AXIA_milos
- Axia Team
- Posts: 281
- Joined: Fri May 25, 2007 2:54 am
- Location: San Luis Obispo, CA
-
- Posts: 7
- Joined: Wed Oct 17, 2007 8:00 pm
- Location: Port Elizabeth, SA
- Contact:
- AXIA_milos
- Axia Team
- Posts: 281
- Joined: Fri May 25, 2007 2:54 am
- Location: San Luis Obispo, CA
Unless a customer who reviews these forms has done this, your only option will be RCS support. We at Axia basically know nothing about how to use (or setup) RCS Master Control. RCS, as a partner that sells the IP driver should know how to interface with it and to configure the GPIO. If they need help, they have channels to communicate with us.