Hi all, so I've identified the button module in the Element (per another\ thread) as #3, but when I try to get Pathfinder to light the buttons, nothing happens.
What am I doing wrong? In Pathfinder, I have a stack event that contains the host IP of the Element, the user module #3, button #5, and the state set to ON.
But no illumination occurs. I know the qualifier is OK as there's another event in there that is working.
Any ideas where I'm going wrong please? I've done this before successfully, but I'm obviously missing something.
Is there a telnet command I can enter to test the button illuminations?
Thanks
Andy.
Button module not lighting
Moderators: AXIA_milos, DanBays
- AXIA_milos
- Axia Team
- Posts: 281
- Joined: Fri May 25, 2007 2:54 am
- Location: San Luis Obispo, CA
Set the ON state color to something basic at first... as in RED.
ON state and OFF state are functions of Pathfinder and not the button. So in Pathfinder, you need to define a color for the ON state. I like to use basic colors... as in RED, GREEN, BLUE, YELLOW. You can also define by the HEX value, but for now, just start with the basics.
ON state and OFF state are functions of Pathfinder and not the button. So in Pathfinder, you need to define a color for the ON state. I like to use basic colors... as in RED, GREEN, BLUE, YELLOW. You can also define by the HEX value, but for now, just start with the basics.
-
- Posts: 40
- Joined: Mon Sep 01, 2008 2:08 am
- AXIA_milos
- Axia Team
- Posts: 281
- Joined: Fri May 25, 2007 2:54 am
- Location: San Luis Obispo, CA