compliment,
i had been finding it difficult to record,what do i do.
thanks
recording
Moderator: AXIA_milos
- AXIA_milos
- Axia Team
- Posts: 281
- Joined: Fri May 25, 2007 2:54 am
- Location: San Luis Obispo, CA
how to record
What is your recording device?
How does your recording device receive audio?
What do you want to record?
How does your recording device receive audio?
What do you want to record?
Re: how to record
the recording deviice is an audiovault.AXIA_milos wrote:What is your recording device?
How does your recording device receive audio?
What do you want to record?
it reciieve via a livewire tech..
want 2 record musics into the system.
- AXIA_milos
- Axia Team
- Posts: 281
- Joined: Fri May 25, 2007 2:54 am
- Location: San Luis Obispo, CA
As for how to start a recording session with AudioVault, you need to ask tech support from AudioVault.
As for the getting the correct audio source into the recorder, assuming the AV is setup to record from the first input, you should go to the Windows START and select CONTROL PANEL. Find the AXIA IP-Audio icon. Select that. In the window that comes up, find the Destination section and on Channel-1, select the BROWSE button. From the window that pops up, select the appropriate audio source you wish to record.
As for the getting the correct audio source into the recorder, assuming the AV is setup to record from the first input, you should go to the Windows START and select CONTROL PANEL. Find the AXIA IP-Audio icon. Select that. In the window that comes up, find the Destination section and on Channel-1, select the BROWSE button. From the window that pops up, select the appropriate audio source you wish to record.
- AXIA_milos
- Axia Team
- Posts: 281
- Joined: Fri May 25, 2007 2:54 am
- Location: San Luis Obispo, CA
- AXIA_milos
- Axia Team
- Posts: 281
- Joined: Fri May 25, 2007 2:54 am
- Location: San Luis Obispo, CA
If you are able to preview the audio through the Axia IP-Audio window, then this proves the audio is getting to the PC. If you are not able to record with your recording machine, then this is an issue with the configuration of your recording application. You need to discuss this with the Application vendor or the integrator that built your system.