Audio node meters
Moderator: AXIA_milos
-
- Posts: 4
- Joined: Wed May 19, 2010 9:59 pm
Audio node meters
I have one audio node that the "meter" page does not show while other audio node meter pages do. Is this a config issue or has it just quit in the node?
- AXIA_milos
- Axia Team
- Posts: 281
- Joined: Fri May 25, 2007 2:54 am
- Location: San Luis Obispo, CA
Bob:
There is no config option to enable/disable the front meters. They should always be active. If you press the Select button, does the display change through the various display screens? If not, likely the display has gone south. Best to send an email to Support(at)AxiaAudio.com or call them 216.241.7225 to get an RA issued for that to be resolved.
milos
There is no config option to enable/disable the front meters. They should always be active. If you press the Select button, does the display change through the various display screens? If not, likely the display has gone south. Best to send an email to Support(at)AxiaAudio.com or call them 216.241.7225 to get an RA issued for that to be resolved.
milos
-
- Posts: 4
- Joined: Wed May 19, 2010 9:59 pm
Web page not hardware display
The fault is that hte meters page is not showing up in the browser from the node not on the hardware display.
I have also lost all meter pages for all nodes after doing the firmware upgrade to ver 2.5.2g.
I have also lost all meter pages for all nodes after doing the firmware upgrade to ver 2.5.2g.
- AXIA_milos
- Axia Team
- Posts: 281
- Joined: Fri May 25, 2007 2:54 am
- Location: San Luis Obispo, CA