Axia iQ Phone controller with a Telos iQ6

[AXIA_milos]

to configure the iQ phone controller to control the 6 possible lines of an iQ6, edit the show profile of interest (or all 4).
under the Phone Connection heading, there is a "Phone Server IP" field. Enter in the user:password@IPaddress

Code: Select all

telos:telos@192.168.2.37

You then need to enter in the "Studio Name" field

Code: Select all

Hybrid 1&2

leave the show name field blank as this is used in VX Engine.

For the iQ6 source profiles (Livewire sources), make sure you select an option in the "Hybrid for Telos phone" field. You should select the
"Selectable" option.

Backfeed (mixminus) should happen automatically as long as you have two Livewire outputs set to "Auto backfeed", There is no configuration other than dedicating two outputs in such a manner.