2 QORs + switch config question

davidmb · Post by **davidmb** » Wed Oct 16, 2013 9:03 am

Hello all,

I have a question regarding network configuration.

We have 2 studios - each with its own QoR32 connected together through Cisco Catalyst switch via 1GB lan ports. (Switch has 24 100 + 2 1000Mb ports). This ports are configured as trunk. On 100Mb ports (wich are not configured as trunk) of these switch there are also a few devices - 2 Aes xNodes with some Livewire destinations + 2 PCs with Livewire sources, + 1 VM with Pathfinder... Everything is running smoothly.

My question is: If i phisicaly remove one device from this switch (like for instance unplug a cable of one PC) there is no interruption. BUT when I connect it back - I always get Sync procedure on all devices connected to this switch. The same happens if just reboot physical PC connected to it. Is this normal or do we have some missconfiguration?
Because this does not happen if I reboot device connected directly to QoR...

Thank you for your help and BR, David

davidmb · Post by **davidmb** » Wed Feb 05, 2014 9:11 am

Solved - it was missconfiguration of the core switch that was causing this.