Hi
I have installed a HX1 but I can't seem to get the GPIO on QOR32 engine to work. I have created a Phone source type for the HX1 and have assigned the GPIO accordingly but I don't seem to get the pulse on pins 4 & 5 to trigger the take and drop function on the HX1. However when I set the phone as Line source, I get the pulse and the HX1 responds correctly. Please help!
IQ Phone Profile
Moderator: AXIA_milos
Poor Documentation
After Days of struggle it was poor manual documentation for OQR Version2.
GPIO control of phone sources which are NOT connected to a Telos hybrid via IP have a slight change to the GPIO template between QOR v1 and QOR v2 software. The function of answer/drop is via the soft key, not the ON/OFF keys. This allows for off-air use of the hybrid.
GPIO control of phone sources which are NOT connected to a Telos hybrid via IP have a slight change to the GPIO template between QOR v1 and QOR v2 software. The function of answer/drop is via the soft key, not the ON/OFF keys. This allows for off-air use of the hybrid.