Mono output?

Andy Linton · Post by **Andy Linton** » Sun Jan 04, 2009 9:08 pm

Hi all, how can I derive a mono output from the Element please?

Thanks

Andy.

AXIA_milos · Post by **AXIA_milos** » Mon Jan 05, 2009 3:26 am

Use VMODE on the Engine. Select PGM1 as the source and the mode set to Split L -3 (this will sum Left and Right, reduce by 3dB, place audio on Left channel of VMODE channel). When selecting a node destination to be this mono audio, select the VMODE source. The audio will be on the Left channel. If you want the audio to be present on both L and R side of the Node output, then make sure the destination is a ODD numbered and you have the option to select mono source from Left.