Hallo,
Am getting an error " mman: module 1:1: old conf_alive Rx=3 cur=65" from the element which i don't know what it means.
May someone kindly explain this?
Ben.
Element Logs
Moderator: AXIA_milos
-
MarcJohnson
- Posts: 9
- Joined: Wed Jun 06, 2007 4:29 am
- Location: Auburn, Alabama - USA
- Contact:
Hello Ben,
This is a communication issue to the first module in your Element. It is a 4-fader module with and ID of 1. Can you check the CAN bus connection from the overbridge to the module and after that, enter test mode to be sure that unit is operating correctly?
Feel free to drop us an email at support@axiaaudio.com with your phone and we can contact you real-time about this issue.
Marc
-------------------------------------------------------------
Marc Johnson
Axia Technical Support
Telos Systems / Omnia / Axia
Main Office: (216) 241-7225
24/7 Support Line: (216) 622-0247
mjohnson@axiaaudio.com
For immediate response, use: support@axiaaudio.com
-------------------------------------------------------------
This is a communication issue to the first module in your Element. It is a 4-fader module with and ID of 1. Can you check the CAN bus connection from the overbridge to the module and after that, enter test mode to be sure that unit is operating correctly?
Feel free to drop us an email at support@axiaaudio.com with your phone and we can contact you real-time about this issue.
Marc
-------------------------------------------------------------
Marc Johnson
Axia Technical Support
Telos Systems / Omnia / Axia
Main Office: (216) 241-7225
24/7 Support Line: (216) 622-0247
mjohnson@axiaaudio.com
For immediate response, use: support@axiaaudio.com
-------------------------------------------------------------