Talk about Element audio consoles.
Moderator: AXIA_milos
george_nz
Posts: 7 Joined: Sat Sep 01, 2007 7:05 am
Location: New Zealand
Post
by george_nz » Sun May 13, 2012 6:10 pm
I am wanting to control the one plus one using a fader chanel on 8 fader element with 1.1.13.13a FW. - Production studio -
When I set the source config as a "phone" channel the is no start / stop pulse output on GPIO pins 4 and 5.
With it set as a "line" source then the pulses are present and remote works fine.
Would appreciate an explanation - wil set it up as a "line" input for now.
thanks
george
AXIA_milos
Axia Team
Posts: 281 Joined: Fri May 25, 2007 2:54 am
Location: San Luis Obispo, CA
Post
by AXIA_milos » Thu May 17, 2012 11:13 am
The likely reason for this is because the "Hybrid answer mode:" option in the source profile is set to
"Normal, auto answer disabled"
Where you want one of the other two options:
"Channel ON answers hybrid"
"Channel ON or Preview ON answer hybrid"
george_nz
Posts: 7 Joined: Sat Sep 01, 2007 7:05 am
Location: New Zealand
Post
by george_nz » Thu May 17, 2012 11:50 am
Thanks Milos. I got it sorted and that was exactly the problem.
I bumped into Igor and he remembered the fix.
tekillo
Posts: 1 Joined: Fri Apr 03, 2015 8:13 pm
Post
by tekillo » Sat Apr 04, 2015 12:18 am
Hi, guys!
I found this topic in the search.
I have problem such as george_nz, but my console IQ. My software v2.xx
How to solve my problem?
Thanks in advance!
clarknovak
Post
by clarknovak » Tue Jun 16, 2015 9:39 pm
tekillo, it should be exactly the same fix - go to your Source Profile for the phone system and set your answer option as Milos details above.