GPIO control for Telos One Plus One

george_nz · Post by **george_nz** » Sun May 13, 2012 6:10 pm

I am wanting to control the one plus one using a fader chanel on 8 fader element with 1.1.13.13a FW. - Production studio -

When I set the source config as a "phone" channel the is no start / stop pulse output on GPIO pins 4 and 5.
With it set as a "line" source then the pulses are present and remote works fine.

Would appreciate an explanation - wil set it up as a "line" input for now.

thanks
george

AXIA_milos · Post by **AXIA_milos** » Thu May 17, 2012 11:13 am

The likely reason for this is because the "Hybrid answer mode:" option in the source profile is set to
"Normal, auto answer disabled"

Where you want one of the other two options:
"Channel ON answers hybrid"
"Channel ON or Preview ON answer hybrid"

george_nz · Post by **george_nz** » Thu May 17, 2012 11:50 am

Thanks Milos. I got it sorted and that was exactly the problem.
I bumped into Igor and he remembered the fix.

tekillo · Post by **tekillo** » Sat Apr 04, 2015 12:18 am

Hi, guys!

I found this topic in the search.

I have problem such as george_nz, but my console IQ. My software v2.xx

How to solve my problem?

Thanks in advance!

clarknovak · Post by **clarknovak** » Tue Jun 16, 2015 9:39 pm

tekillo, it should be exactly the same fix - go to your Source Profile for the phone system and set your answer option as Milos details above.